Step 1 · Workshop
What keeps the system performing: PrecisionPro plates, foam interfaces, the light that shows the swirls, pad cleaning and organising the machines on the wall or in the case.
Step 1 · Workshop
What keeps the system performing: PrecisionPro plates, foam interfaces, the light that shows the swirls, pad cleaning and organising the machines on the wall or in the case.
The Mark V plates: balanced for different pads and with a rubber rim that protects edges and delicate areas. In 125 mm (LHR15) and 150 mm (LHR21).
Soft foam between the plate and the abrasive or pad: spreads pressure on curves and protects the paint on edges. With or without extraction holes, 7 or 12 mm thick.
Inspection light that reveals swirls, holograms and residue before and after polishing: without it you cannot see what is left to correct.
Cleans the pad in 3 seconds with a compressed-air spiral: removes built-up compound and paint and keeps cut and finish the same from the first panel to the last.
Hand brush to loosen compound from the pad while working, with the machine running slowly, without taking the pad off the plate.
Soft microfibres to remove compound and polish residue without scratching; wash and use again.
Wall holder for BigFoot polishers: machines hanging, cable tidy and the bench free.
BigFoot semi-rigid cases and bags to carry the polisher, plates, pads and compounds: the detailer’s mobile workshop.
Manufacturer specs side by side. Click a name for the full page.
| Specification | AirJet pad cleanerNew | Claw pad tool |
|---|---|---|
| Power source | Compressed air | — |
| Time | ≈ 3 s per pad | — |
| Use | — | Foam and wool pads |
Manufacturer specs side by side. Click a name for the full page.
| Specification | BigFoot wall holder | BigFoot bags and cases |
|---|---|---|
| Mounting | Wall | — |
| Use | BigFoot polishers | Carrying the kit |
Frequently asked questions
What detailers ask us most often about throws, colour-coded pads, compounds, iBrid and warranty.
Lighter and tougher POLYSYNTHEC™ composite gears, less vibration, around 47 % less noise than previous generations, a centre of gravity 13 mm lower and PrecisionPro plates with a rubber rim that protects edges and delicate areas.
While working, clean after every panel with the AirJet (3 seconds of compressed air) or the Claw. At the end of the day wash in warm water, squeeze without twisting and dry hook-and-loop side up. A well-kept pad lasts dozens of cars; replace it when the foam tears or loses density.
